Promos / Nouveautés / RéassortsVaporl.com Clearance Sale---Up To 60% Off.

Section réservée à l'actualité concernant les nouvelles marques.
Règles du forum
Seuls les vendeurs peuvent poster dans cette rubrique. Aucun commentaire ne pourra être fait.
Répondre
Avatar du membre
Vaporl Jason
Vendeur
Vendeur
Messages : 53
Enregistré le : mer. 12 avr. 2017, 08:34
Genre : Homme

Vaporl.com Clearance Sale---Up To 60% Off.

Message par Vaporl Jason » lun. 5 févr. 2018, 06:55

Clearance Sale:Sigelei Fuchai GLO 230W TC Kit Only $29.9
Hey, vapors. Here are vapor. We bring you a clearance sale for you, up to 60% off, you can order in low price for you vaping gears, including Eleaf iStick Pico Resin Box Mod, Eleaf iKonn Total Kit, Sigelei Fuchai GLO 230W TC Kit and Lost Vape Therion DNA75C Box Mod.

Eleaf iStick Pico 75W RESIN Box Mod $24.9
Image
This beautifully fashioned Eleaf iStick Pico 75W RESIN Mod features a unique design in every box making the device you buy truly one of a kind. A new Resin material prevents deep and undesirable scratches while delivering a once in a lifetime color combination. A lightweight frame will make portability a breeze combined with the need for only one high-drain 18650 battery. Included in this starter kit is the Melo III sub-ohm vape tank filled with the greatest ease due to its top fill design.

Features:
Wattage: 1 - 75W
Resistance range: 0.05 - 1.5 ohm ( TC mode ) / 0.1 - 3.5 ohm ( VW / Bypass mode )
TC range: 200 - 600 Deg.F
Supports single 18650 battery ( not included )
Available modes: VW / Bypass / TC ( Ni, Ti, SS, TCR ) mode
Firmware upgradeable
Material: resin
Thread: 510

Click to order Eleaf iStick Pico RESIN 75W Box Mod in $24.9

Pioneer4You iPV Vesta 200W TC Box Mod $24.9
Image
The Pioneer4You iPV Vesta 200W TC Box Mod presents a modernized workhorse device, integrating the latest YiHi SX-410 Chipset capable of outputting up to 200W paired with one of the most sophisticated temperature control suite in a streamlined chassis. It is with low voltage,resistance protection,high input voltage warning,temperature overheat protection,output short circuit,reverse battery protection & visual operating system.

Specifications:
Output Power: 10W-200W
Output Joule: 10J-120J
Standard Resistance: 0.15ohm-3.0ohm
Joules Mode Resistance: 0.05ohm-1.5ohm
Temp. Limit Centigrade: 100°C-300°C
Color: Black, Grey, Silver, Red

Order Pioneer4You iPV Vesta 200W Box Mod in $24.9

Lost Vape Therion DNA75C Box Mod $89.9
Image
The Lost Vape Therion DNA75C Box Mod is a cutting-edge work of art, with supple leather and wood detail on the outside, powered by Evolv’s newest board on the inside. The Therion operates on two 18650 cells. You can charge the device via the mini USB port or using an external charger. Using two battery cells the mod reaches 75 watts, while its temperature control features with TCR availability extends your functionality. In addition to whiter LEDs, there are three lines of display, with the lowest line showing you the type of material for the coil, I.E. KA for Kanthal. The previous incarnation offered voltage, which has been done away with.

Specifications:
Dimensions: 90.5mm*54mm*27mm
Screen: Full color TFT screen
Material: Die cast zinc alloy body
Battery: Dual 18650 in parallel device (batteries sold separately)
Temperature limit: 200°F – 600°F
Output power: 1 – 75 watts

Buy Lost Vape Therion DNA75C Box Mod in $89.9

Sigelei Fuchai GLO 230W TC Kit in $29.9
Image
The Sigelei Fuchai GLO 230W TC Kit takes the success of the Fuchai 213 platform and created the Fuchai GLO, a 230W temperature control box mod and paired it with the SLYDER Tank. The Fuchai GLO is powered by dual 18650 batteries and is capable of firing up to 230W. Its advanced power chipset allows users to customized the LED color strip at the base of the mod, and is integrated with a full-color OLED display, temperature control, and TCR/TFR. It is paired with the SLYDER Tank which holds 2.8ml of e-liquid and is designed with a sliding top-fill system.

Specification:
Size: 88.0*47.3*32.3 mm
Main Material: Aluminum alloy+Zinc Alloy
Tank Capacity: 2.8ml
Wattage Range: 10W-230W
Temperature Range: 100°C-300°C/200°C-570°C
Battery Type: Dual 18650(not included)
Working Modes: POWER/SS/ Ti1/ Ni200/TCR
Resistance Range: 0.05Ω-3.0Ω
Coil Supporting: KA1/SS(304/316/317)/Titanium/Ni200/TCR
Color: Black, Red, Blue

Shop Sigelei Fuchai GLO 230W TC Kit in $29.9

Eleaf iKonn Total Kit $14.5
Image
The Eleaf iKonn Total 50W Starter Kit with Ello Mini XL Sub-Ohm Tank is a compact side by side device capable of extraordinary vapor production. The iKonn mod is designed with a recessed 510 connection accessed via a sliding windowed side panel. The removable side panel protects the tank and is used as a squeeze fire firing button. The Ello Mini XL Sub-Ohm Tank is a 22mm 5.5ml tank which sits parallel with the single 18650 (sold separately) battery tube, giving the iKonn Total a compact form factor. The Ello utilizes the new HW Series atomizers and includes both the single parallel 0.2 ohm coil as well as the dual parallel 0.3 ohm coil. The iKonn features a stealth LED battery life indicator for quick battery life visualization and the stealth button design gives the iKonn a striking visual presentation.

Specifications:
Battery: 18650*1(Not included)
Size (with ELLO mini): 48.8mm*28.0mm*84.0mm
E-liquid capacity: 5.5ml
Maximum wattage: 50W
Resistance range:0.15-3.0ohm
Color:Full Black,Full Grey,White Greenery,Black,Blue Silver

Shop Eleaf iKonn Total Kit in $14.5

Sigelei Vcigo K3 150W Starter Kit - Sigelei Fuchai Vcigo K2 Kit -Sigelei Fuchai Squonk 213 Mod Kit
Sigelei Vcigo K3 150W Starter Kit
Image
Sigelei Vcigo K3 Kit is made of the Rubber-oil material that creates an ideal feel in your hand. Power by dual 18650 batteries, the maximum output can up to 150w, it supports the POWER, SS, Ti1, Ni200 and TC modes. It is designed with the simple operation that easy to change the modes anytime. Comes with the Vcigo O9 tank that has not any leak problem. Get the high-quality Box Kit with the best price in your vape life!

Specification:
Sigelei Vcigo K3 Box Mod:
Size: 87mm x 43.21mm x 33.25mm;
Main material: all plastic;
1.3inch OLED display;
Output range: 10~150W;
Temperature range: 100~300'C / 200~570'F;
Voltage input: 6.4~8.4V;
Voltage output: 1.0~7.5V;
Powered by 2 x 18650 batteries (not included);
Modes: POWER / SS / Ti1 / Ni200 / TC;
Resistance range: 0.05~3.0ohm;
Coil supporting: Kanthal / SS (304 / 316 / 317) / Titanium / Ni200 / TCR;
Micro USB charging support: DC 5V / 2.5A;

Tank:
Size: 24.5mm x 40.5mm;
Stainless steel construction;
Capacity: 2ml;
Easy top filling;
Adjustable bottom airflow;
Coil support: SM2-H / SM2 / SM4 / SM6;
Coil material: SS303;
Size of the coil: 14.6mm x 18mm;
Will it have LED options: No

Click to see more detail about Sigelei Vcigo K3 150W Starter Kit

Sigelei Fuchai Vcigo K2 Kit
Image
The Sigelei Fuchai Vcigo K2 Starter Kit features a high powered mod that is designed for a comfortable, all day vaping experience using the two configurable fire buttons and rubberized grip. The Vcigo K2 can fire up to 230 watts and supports temperature control modes for Nickel, Titanium, Stainless Steel wire and TCR. The Fuchai Vcigo K2 also features a voltage regulation mode and a preheat function. The Sigelei Fuchai Vcigo K2 requires (2) high amp 18650 batteries (sold separately) which may be charged via the micro USB charging port. This starter kit also includes the Fuchai Cubic RDA which features the popular dual post velocity style build deck with four post holes. The Fuchai Cubic RDA features a sleek cube or square shape design and includes a ultra wide bore drip tip which also allows you to drip directly onto the coil and cotton.

Specification:
Size: 87*43.21*33.25
Main material: All plastic
Display: 1.3〞 OLED
Wattage range: 10W-150W
Temperature range: 100℃-300℃is consits of /200℉-570℉
Voltage input: 6.4V-8.4V
Voltage output: 1.0V-7.5V
Battery support: 2*18650
Modes: POWER/SS/Ti1/Ni200/TC
Resistance range: 0.05Ω-3.0Ω
Coil supporting: Kanthal/SS(304/316/317) / Titanium/Ni200/TCR
Charging support (Micro USB): DC 5V/2.5A
Size: ¢24.5*40.5
Color options:Stainless steel
Maximum Juice Capacity: 2.0ml
Tank Materials: SS303+ transparent glass
Top fill style
Air flow control design: Adjustable Bottom Airflow
Coil types and coil support: SM2-H/ SM2/SM4/SM6
Coil Material: SS303
Size of the coil: ¢14.6*18
Will it have LED Options: No

Click to order Sigelei Fuchai Vcigo K2 Kit

Sigelei Fuchai Squonk 213 Mod Kit
Image
Fuchai Squonk 213 Mod Kit is the latest squonker device from Sigelei which is compatible with 21700,20700,18650 battery. Fuchai Squonk 213 Kit comes with POWER, Ti1, Ni200, 304, 316 and 317 modes, and the maximum wattage can go up to 150W. With the super power 21700. The squonk bottle with 5ml large capacity is designed to meet your daily vaping needs.

Specifications:
Size: 88.5*45*31mm
Main material: aluminium alloy+zinc alloy
Display: 0.96 inch TFT color screen
Wattage range: 10W-150W
Modes: POWER/Ti1/Ni200/304/316/317
Voltage input: 3.2V-4.2V
Battery support: 1*21700/1*20700/1*18650
Resistance range: 0.1ohm-3.0ohm
Eliquid capacity: 5ml
Coil supporting: Kanthal/SS(304/316/317)/Titanium/Ni200/TCR
Charging support (Micro USB): DC 5V/2

Shop Sigelei Fuchai Squonk 213 Kit
Eleaf Tessera 150W Starter Kit,iStick Melo 60W,BASAL 30W Starter Kit
Eleaf Tessera 150W Starter Kit
Image
Eleaf Tessera Starter Kit is the latest vape kit by eleaf, including an internal Tessera box mod and 4ml Eleaf TS tank Atomizer. Features the elegant diamond cutting surface appearance, it is the high-texture mod. Comes with a low-poly design and large 1.45 inch tft color screen for easy to check all vaping data. The Tessera Kit comes with a built-in battery for long lasting vaping, the maxmim output can reach 150W. The ELLO TS Atomizer with the convenient retractable top filling, adjustable bottom airflow system and HW coils, will bring the intense flavor. Availalbe in 5 colors.

Eleaf Tessera 150W Starter Kit Comes With:
1 x Eleaf Tessera Mod
1 x Eleaf TS tank
1 x HW1 Single0-cylinder 0.2ohm head
1 x QC USB Cable
1 set warning card
1 set spare parts

Eleaf iStick Melo 60W Starter Kit
Image
Eleaf iStick Melo kit includes a iStick melo battery and a melo 4 D22 atomizer. The iStick Melo battery features 4400mah built-in capacity which can support 60W maximum output power. It has 0.49inch OLED screen on the top of the mod. It is allowing you to view all essential information with a simple glance even while vaping. The Melo 4 Atomizer applied with EC2 coils for great vaping experience. Convenient retractable top fill design makes refilling easier.

Specifications:
Size: 42mm*22mm*132.5mm
Liquid Capacity: 2ml
Tank Diameter: 22mm
Battery Capacity: 4400mAh
Maximum Charging Current: 2A
Thread Type: 510 thread
Output Wattage: 1-60W
Output Mode: VW/Bypass/TC(Ni/Ti/SS/TCR)
Resistance Range: 0.05-1.5ohm (TC), 0.1-3.5ohm (VW/Bypass)
Colors: Black, Greenery, Silver, Rose Gold, Red

Click to order Eleaf iStick Melo 60W Starter Kit

Eleaf BASAL 30W Starter Kit
Image
The BASAL 30W Starter Kit is the latest vape device from Eleaf that features an ultra thin and portable chassis paired with the GS Basal MTL Tank. The BASAL Mod is equipped with a 1500mAh internal battery and boasts a maximum output of 30watts. The BASAL mod utilizes a optional UI that allows you to choose if Voltage, Puff, Time and a bigger battery indicator bar is to be displayed on the easy to read screen. A safety suite of circuit protections that includes over charging, over current and over discharging. With a maximum 2A charging current the BASAL can charge quickly through the USB port. Paired with the BASAL Mod is the GS Basal Tank that features 1.8mL of juice capacity, a threaded bottom fill. The bottom airflow that can be adjusted by the airflow control ring at the base of the tank.

Specification:
GS BASAL Atomizer Features:
GS Air coils optimized for flavor
A refined airflow system for MTL
GS Air Coils Optimized for Flavor
510 threading connection
15mm overall diameter
BASAL Mod Features:
Ultra Thin and Portable
Solid Structure of All Stainless Steel
All-in-One Style, built-in 1500mAh battery
2A quick and efficient recharging
Dual Circuit Protection
510 threading connection

Shop Eleaf BASAL 30W Starter Kit

Eleaf iStick Kiya 50W Starter Kit
Image
The Eleaf iStick Kiya 50W TC Box Mod Starter Kit that features a 1600 mAh built in battery and utilizes the new Juni Tank; The Kiya is capable of 1 to 50W with a full temperature control suite and a real time clock background. A crisp 1.45 inch colored screen sits on the middle of the device and indicates battery life at the bottom, output power, atomizer resistance, and a real time clock (digital) that also acts as a screensaver. The Kiya is operated by a three button interface, and has 2A quick charging capability via micro USB port. The Kiya utilizies the ENU technology; ENU protects the devices battery from over heating while charging. Eleaf introduces their new GS Juni Tank with the Kiya, a bottom fill design that can accommodate up to 2ml of E-Liquid. The GS Juni utilizes the GS Air system and comes with a GS Air 0.75 ohm coil, rated at 8 to 25, and a GS Air 1.5 ohm coil, rated at 8 to 20W.

Specifications:
Size: 35.5mm*25.8mm*94.5mm
Liquid Capacity: 2ml
Battery Capacity: 1600mAh
Maximum Charging Current: 2A
Output Wattage: 1-50W
Output Mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance Range: 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW/Bypass mode)
Temperature Range: 100-315°C/200-600°F(TC modes)
Color: Greenery, Silver, Black

Order Eleaf iStick Kiya 50W Starter Kit

Ample Mace Sub-Ohm Tank|ADC and AHC Patent Protection
Ample Mace Sub Ohm Tank
Image
Ample Mace Sub Ohm Tank is the latest vape tank by Ample, measures in 24mm diameter, the Mace tank adopts a new typ of disc-shape heating coil, and by improving the electricity routing, improves the resistance, makes it work under a more reasonable and healthy range of power. Meanwhile, due to the hive holes and e-liquid is increased and expanded, ths making the e-liquid be vaped more completely, and then give much more steam vapor, while let you enjoy the vaping purity and original of e-liquid to the greatest degree.

Specification:
Material: Stainless Steel + Pyrex Glass
Length: 37.5mm
Diameter: 24(-25)mm
Capacity: 2ml/3ml/4.5ml
G.W(Included package): 132g

Click to see more detail about Ample Mace Sub Ohm Tank

Aspire Revvo Sub Ohm Tank
Image
The newest Aspire Revvo tank is designed with an innovative, revolutionary, new type of coil, the ARC Radial Coil. With an adjustable top airflow construction and a special spring-loaded filling tube, it is the easy tank to pair with any mods. You'll be amazed by the innovation that Aspire has put into this fantastic new design.

Features:
3.6ml capacity
New ARC(Aspire Radial Coil) technology
Spring loaded filling tube for top refilling
Adjustable top airflow by way of 3 airflow slots
Come with a protective silicone cap
510 threading connection
24mm overall diameter

Click to order Aspire Revvo Sub Ohm Tank

Vandy Vape Maze Sub Ohm BF RDA
Image
Vandy Vape are proud to present to you a worlds first, the Maze Sub-Ohm BF RDA. Utilizing the innovative Maze Coil Discs, this device has better safety and compatibility, it can be used on both Regulated and Unregulated / Mechanical Mods! Featuring 5 way directional airflow and these new Maze Coils, the Maze Sub-Ohm BF RDA will prevent spit-back of juice and deliver an ultra smooth vaping experience.

Vandy Vape Maze Specs:
Length:22.5mm
Diameter:24mm
Capacity:2ml
Standard 510 connector pin
Bottom feed squonk pin
Flat radial coil
Adjustable airflow
Anti spitback design

Shop Vandy Vape Maze Sub Ohm BF RDA Tank

New Release: VGOD Pro Mech Series 2 Kit
VGOD Pro Mech Series 2 Kit
Image
VGOD Pro Mech Series 2 Mech Kit is the latest mech kit from VGOD, which is powered by single battery. Pro Mech Kit comes with a slim mech size for comfortable feeling in hand! VGOD Pro Mech 2 features a grid appearance to anti-slip. Included VGOD RDA Tank fits pro Mech Mod 2 perfectly, with dual coil building deck, offering huge vapors and awesome flavors.
Image

Wismec Reuleaux RX Machina Kit
Image
Wismec Reuleaux RX Machina Kit features in resin tube & press structure fire button, the user can replace the battery more conveniently. Interchangeable tubes make your setup always unique. Differing from the conventional button configuration, RX Machina moves all the functional button parts up into the 510 section and has the smallest possible profile for a 20700/18650 mod. RX Machina is not only a stunning device which captures the innovation and advancement in Mech technology, but is is also presented in a beautiful way making this product very special.

Reuleaux RX Machina Kit Feature:
1. The smallest 20700 mechanical tube mod
2. Interchangeable exterior sleeves with Honeycomb Resin design
3. Compatible with 18650 battery (adapter included)
4. Deep liquid wall with large fixing post slots for different types of wire
5. Bottom airflow system brings great vaping experience

CoilART Mage Mech Tricker Kit
Image
The CoilART MAGE MECH Tricker Kit includes a adjustable airflow tank and a self-adjusting battery contact mechanical mod, the tank features 24K Gold plated deck design. The Mod body is made from billet red copper construction by one 18650 battery, and is ideal for those advanced vapers.

Coilart Mage Mech Tricker Kit Features
510 Threaded
Dimensions: 24 x 125mm
Billet Brass Construction
PEEK Insulator
24K Gold Plated Deck
Dual Post Design
Magnetic Fire Button
Bottom Adjustable Airflow
Multi-Color Resin Coating
Battery: 18650 (Not Included)
Derlin Drip Tip

Click to see CoilART Mage Mech Tricker Kit Resin Edition
Image

Best Squonk Mod Kit: Vandy Vape Pulse BF Squonk Box Mod With Phobia RDA
Today, let's take a look at a beautiful squonk kit, the VV pulse bf kit, including Vandy Vape Pulse BF Squonk Box Mod and Phobia RDA Tank Atomizer
Image

Vandy Vape PHOBIA RDA Tank Atomizer
Image
Vandy Vape's and Alex from VaporsMD introduces the Phobia 24mm BF RDA, a bottom fed capable dripping atomizer with a post-less quad terminal style building deck, a dual centralized airflow system, measuring at 24mm diameter and dual or single coil capability. The Phobia has a 5mm deep juice well with centralized juice splitter for even juice distribution, as well as dual centralized airflow system located on the build deck for a smooth inhale. The Phobia has a post-less deck that features four terminals, the coil is held down through Philip screws located on the sides, making the Phobia easy to build. The Vandy Vape Phobia 24mm BF RDA was designed for maximizing flavor and vapor production in an easy to build design for anyone looking for a smooth and stylish rebuildable atomizer.

PHOBIA BF RDA Tank Atomizer Features:
Stainless steel construction
Unique base
Simple and vertical installation of the coils
Original bottom and side airflow
Option to use 810 drip tip and custom 24mm Chuff Caps
510 threading connection
24mm overall diameter

Click to see more detail about Vandy Vape PHOBIA RDA Tank Atomizer

Vandy Vape Pulse BF Squonk Box Mod
Image
The Pulse BF Box Mod from Vandy Vape, is an affordable squonk mod for everyone. It features lockable power switch for safety concern, spring loaded 510 connection, 8ml food grade silicone bottle for squonking and replaceable front and back panels. The Pulse BF Box Mod is powered 1 x 20700 battery, and can be compatible with 18650 by using battery adapter

Pulse BF Box Mod Features:
8ml Capacity
40A Maximum current
PEEK insulator
Copper contacts
Locking power safety switch
Material: Nylon + ABS
Spring loaded 510 threading connection
Magnetic Replaceable panels
Compatible with 18650 / 20700 battery (not included)
8ml food grade silicone bottle with a stainless steel cap

Click to order Vandy Vape Pulse BF Squonk Box Mod

Best Squonk Mod Kit: Vandy Vape Pulse BF Squonk Box Mod With Phobia RDA
Today, let's take a look at a beautiful squonk kit, the VV pulse bf kit, including Vandy Vape Pulse BF Squonk Box Mod and Phobia RDA Tank Atomizer
Image

Vandy Vape PHOBIA RDA Tank Atomizer
Image
Vandy Vape's and Alex from VaporsMD introduces the Phobia 24mm BF RDA, a bottom fed capable dripping atomizer with a post-less quad terminal style building deck, a dual centralized airflow system, measuring at 24mm diameter and dual or single coil capability. The Phobia has a 5mm deep juice well with centralized juice splitter for even juice distribution, as well as dual centralized airflow system located on the build deck for a smooth inhale. The Phobia has a post-less deck that features four terminals, the coil is held down through Philip screws located on the sides, making the Phobia easy to build. The Vandy Vape Phobia 24mm BF RDA was designed for maximizing flavor and vapor production in an easy to build design for anyone looking for a smooth and stylish rebuildable atomizer.

PHOBIA BF RDA Tank Atomizer Features:
Stainless steel construction
Unique base
Simple and vertical installation of the coils
Original bottom and side airflow
Option to use 810 drip tip and custom 24mm Chuff Caps
510 threading connection
24mm overall diameter

Click to see more detail about Vandy Vape PHOBIA RDA Tank Atomizer

Vandy Vape Pulse BF Squonk Box Mod
The Pulse BF Box Mod from Vandy Vape, is an affordable squonk mod for everyone. It features lockable power switch for safety concern, spring loaded 510 connection, 8ml food grade silicone bottle for squonking and replaceable front and back panels. The Pulse BF Box Mod is powered 1 x 20700 battery, and can be compatible with 18650 by using battery adapter

Pulse BF Box Mod Features:
8ml Capacity
40A Maximum current
PEEK insulator
Copper contacts
Locking power safety switch
Material: Nylon + ABS
Spring loaded 510 threading connection
Magnetic Replaceable panels
Compatible with 18650 / 20700 battery (not included)
8ml food grade silicone bottle with a stainless steel cap

Click to order Vandy Vape Pulse BF Squonk Box Mod

Répondre

Retourner vers « Promos / Nouveautés / Réassorts »