Frost Mods (Pologne) ⇒ Yeti & Blizzard, Frost-Mods en 28mm !!
- Patricko
- Altostratus
- Messages : 19951
- Enregistré le : jeu. 26 juil. 2012, 02:54
- Ecigarette (s) utilisée (s) : Tubes Méca / Box BF méca / RBA / RDA / Genesis / DIY
- Localisation : Bruxelles, non peut-être...
- Genre :
- Âge : 60
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
Vapemail !!
Le Yeti et le Blizzard enfin à la maison !!
Le grand frère sur Snowflake est tout simplement splendide, la finition exemplaire !
Les deux top cap pour atos 22mm .... l'excellente idée d'avoir deux types de biseautage, l'un droit, l'autre incurvé ... rendu très élégant
Ici avec le G22 et le top cap 22 incurvé
Le tube à le même fini agréable que le Snowflake
Le switch, course courte me semble encore plus doux que celui de mon premier Snowflake !!
Le Blzzard, là encore toute la qualité des G22 et G22 mini
Le plateau légèrement allégé par rapport aux précédents atos genesis maison
Yeti avec son Blizzard
Bref, un superbe combo en 28mm, agréable, relativement léger pour le format, impeccablement pensé et fini !!
Très heureux de mon achat !!
Le Yeti et le Blizzard enfin à la maison !!
Le grand frère sur Snowflake est tout simplement splendide, la finition exemplaire !
Les deux top cap pour atos 22mm .... l'excellente idée d'avoir deux types de biseautage, l'un droit, l'autre incurvé ... rendu très élégant
Ici avec le G22 et le top cap 22 incurvé
Le tube à le même fini agréable que le Snowflake
Le switch, course courte me semble encore plus doux que celui de mon premier Snowflake !!
Le Blzzard, là encore toute la qualité des G22 et G22 mini
Le plateau légèrement allégé par rapport aux précédents atos genesis maison
Yeti avec son Blizzard
Bref, un superbe combo en 28mm, agréable, relativement léger pour le format, impeccablement pensé et fini !!
Très heureux de mon achat !!
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
merci pour ce reportage photo !
ca fait envie
ca fait envie
Fanfare Ciocarlia
https://www.youtube.com/watch?v=E5kS0kM ... Jf&index=1
https://www.youtube.com/watch?v=E5kS0kM ... Jf&index=1
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
Je confirme !
Très beau combo.
Faut que je monte ce camion citerne à mesh maintenant...
Très beau combo.
Faut que je monte ce camion citerne à mesh maintenant...
- Patricko
- Altostratus
- Messages : 19951
- Enregistré le : jeu. 26 juil. 2012, 02:54
- Ecigarette (s) utilisée (s) : Tubes Méca / Box BF méca / RBA / RDA / Genesis / DIY
- Localisation : Bruxelles, non peut-être...
- Genre :
- Âge : 60
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
camion citerne monté pour ma part ...
ben ... comme d'hab avec les atos de MrFrost ... immédiatement séduit par le Blizzard ! Je ne sais pas comment ils font mais depuis le GKmF20 ... les G22 et mini et maintenant le Blizzard .... tous ces atos ont une "ligne", une manière de vape qui malgré les petites différences des uns aux autres .... se retrouve toujours. Je suis franchement épaté par la constance de vape de ces atos ....
Toujours ultra facile à coiler ... l'air flow me fait penser plus à celui du GKmF20 (les anciens avec 1 air hole de 1,2) qu'aux G22 .... le rendu des saveur est "top notch" (comme le G22 mini) ... montage habituel en 0,3x0,1 pour 1,3 ohms. Bref, nickel !
ben ... comme d'hab avec les atos de MrFrost ... immédiatement séduit par le Blizzard ! Je ne sais pas comment ils font mais depuis le GKmF20 ... les G22 et mini et maintenant le Blizzard .... tous ces atos ont une "ligne", une manière de vape qui malgré les petites différences des uns aux autres .... se retrouve toujours. Je suis franchement épaté par la constance de vape de ces atos ....
Toujours ultra facile à coiler ... l'air flow me fait penser plus à celui du GKmF20 (les anciens avec 1 air hole de 1,2) qu'aux G22 .... le rendu des saveur est "top notch" (comme le G22 mini) ... montage habituel en 0,3x0,1 pour 1,3 ohms. Bref, nickel !
- Patricko
- Altostratus
- Messages : 19951
- Enregistré le : jeu. 26 juil. 2012, 02:54
- Ecigarette (s) utilisée (s) : Tubes Méca / Box BF méca / RBA / RDA / Genesis / DIY
- Localisation : Bruxelles, non peut-être...
- Genre :
- Âge : 60
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
Review photos de Timbozero
http://timbozero.tk/reviews/blizzard-at ... rost-mods/
http://timbozero.tk/reviews/blizzard-at ... rost-mods/
Opinions on the Blizzard …
This is a well crafted and reasonably priced device, better value still if ordered with the Yeti mechanical mod (below). There are very few things to dislike here and fans of genesis atomisers will enjoy this.
Personally I prefer a more open vape than the 2 x 1mm air holes provide, but that is subjective and the majority of vapers that like this style of atomiser are more than used to this level of air flow. That said the top cap not only comes in the standard 2x1mm airhole format but, for a small (10$/7euro) fee, you can have horizontal holes for dual coils and sizes of airhole from 0.8 to 2.5mm.
The reduced chamber works well and gives a good solid vapour flavour. I like that Frost were not tempted to expand the diameter of the deck and chamber to match the 28mm exterior and rather increased the mass of the top cap.
Juice capacity is maybe a little low for a 28mm atomiser at 3ml, but it is perfectly adequate for me for the day.
Overall this is a great atomiser and it really works well with the Yeti mechanical. It was easy to build with plenty of room to wind the coil and good solid connection points for the wire.
It is great that the tools required for those hex screws are included, saving you the need to buy your own.
Great job.
Opinions of the Yeti …
This is the first mechanical I have had that uses the 26650 battery, and I have to say I rather like it. The machining is excellent and the adjustment in the top cap suffices for all atomisers and batteries tested.
The machined finished tube and polished top cap and switch work really well together. The engraving is really nice finish to the tube.
The switch is superb, magnetically ‘sprung’ but with the magnets not being part of the contact path. Testing this mod I found that the device only had a total resistance of 0.2ohms and gave zero voltage drop when unloaded. Under a 1ohm load the drop was less than 0.2volt drop at 4.2volts, this is excellent and most of the sag will be down to the MNKE 26650 cell used to test with. Certainly better than most in the 26650 class of mod.
The design of the switch features some massive surface areas in the contact path, this is what contributes to the great power transfer of the mechanical.
I love the Yeti and I shall be keeping it on the living room table as my evening vape device (with the Blizzard atomiser on it). It is a little too large (for me personally) to be an all day device, but it is perfect for the end of the day to wind down in front of a movie with it and a beer.
The Yeti and Blizzard, for me, are the end of day ‘cigar’ of vaping.
Great work Frost Mods, a pair of really nice devices.
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
Ma petite vidéo sur le Yeti...
The Yeti and the Blizzard by Frost Mods :
Envoyé avec mes doigts.
The Yeti and the Blizzard by Frost Mods :
Envoyé avec mes doigts.
- Patricko
- Altostratus
- Messages : 19951
- Enregistré le : jeu. 26 juil. 2012, 02:54
- Ecigarette (s) utilisée (s) : Tubes Méca / Box BF méca / RBA / RDA / Genesis / DIY
- Localisation : Bruxelles, non peut-être...
- Genre :
- Âge : 60
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
Excellent, nichfurt !!
Re: Yeti & Blizzard, Frost-Mods en 28mm !!
Thanks Patricko
Envoyé avec mes doigts.
Envoyé avec mes doigts.