Promos / Nouveautés / Réassorts<Giveaway Contest>Win Demon Killer Tiny Kit, VOOPOO TOO Kit For Free

Section réservée à l'actualité concernant les nouvelles marques.
Règles du forum
Seuls les vendeurs peuvent poster dans cette rubrique. Aucun commentaire ne pourra être fait.
Répondre
Avatar du membre
Vaporl Jason
Membre Déchu
Membre Déchu
Messages : 114
Enregistré le : mer. 12 avr. 2017, 08:34
Genre : Homme

<Giveaway Contest>Win Demon Killer Tiny Kit, VOOPOO TOO Kit For Free

Message par Vaporl Jason » lun. 15 janv. 2018, 09:02

<2 Giveaways>Win Demon Killer Tiny Kit, VOOPOO TOO Kit For Free
Hey, guys, nice to meet you, here comes 2 giveaways for you. Click to Win Demon Killer Tiny Kit, VOOPOO TOO Kit For Free, Good Luck For You All.

Demon Killer Tiny Kit
Image
The Demon Killer Tiny Kit presents the modern day portable vape system, featuring a discrete form factor with 800mAh built-in battery paired and a two-post Tiny RDA for a set-up unlike any other. The Demon Killer Tiny Kit is one of the few compact-size system with a rebuildable section along while emphasizing a balance of performance, size, and portability. It powered by a built-in 800mAh battery, featuring direct voltage output system paired with a top-OLED screen for ergonomic form factor. The Tiny RDA features a compact two-post, single coil configuration to complete one of the few rebuildable, travel-friendly system in the market.

Contest Time: 2018.01.11 - 2018.02.07

Winners: 3 Winners

Click to take part in Demon Killer Tiny Kit

VOOPOO TOO 180W TC Kit
Image
The VooPoo TOO 180W TC Kit includes a high performance VooPoo TOO Mod with an exceptional flavor and vapor producing VooPoo UFORCE Sub Ohm Tank. The VooPoo TOO is powered by one or two high amp 18650 batteries (sold separately) which are accessible through the beautifully wrapped sliding battery panels. Constructed of durable Aluminum and Zinc Alloy, the VooPoo TOO has a maximum power output of 180W and features an upgraded and custom GENE Chip to provide a more accurate vape experience while making the VooPoo TOO operable with single or dual 18650 batteries. The GENE chip has a 95% working efficiency and features an instantaneous 0.010 second firing response time. The UFORCE utilizes flavorful OCC coil heads with large wicking slots to ensure complete wick saturation at all times.

Contest End Time: 2018.01.21

Winners: 2 Winners

Click to join VOOPOO TOO 180W Kit Giveaway Contest

Rules:
1. Please note you must be legal age to vape in your country.
2. Please confirm the e-cigarette is able to delivery to your country.
3. Make sure the email you registered is your common-mail.
4. Please check our winner announcements email to make sure every winner get prize in time.

SMOK TFV12 Baby Prince Tank Atomizer
Image
SMOK TFV12 Baby Prince is the upgraded version of TFV8 baby beast tank! Its included V8 baby -Q4 ,V8 baby-T12 red light coil and V8 Baby Mesh coil are compatible with baby beast coils, the new coils can produce denser clouds and purer flavor at the same wattage, which is an awesome improvement! These coils are newly designed, the light coil will emit beautiful light when you are vaping and the mesh coil has larger heating area to speed heating process. Besides, this tank employs bulb glass tube, which can enlarge the e-juice capacity to 4.5ml. Every detail of TFV12 Baby Prince is the best guarantee for high-quality vaping. Innovation keeps changing the vaping experience!

TFV12 Prince Baby Specs & Features:
E-juice capacity: 2/4.5ml
Size: 26mm x 53.7mm
Material: Stainless Steel
Thread: 510
Resin drip tip
Bulb glass tube for large 4.5ml e-liquid capacity
V8 baby -Q4 ,V8 baby-T12 red light coil

SMOK TFV8 Baby Beast Tank
Image
The SMOKTech TFV8 Baby Beast Tank brings the unrivaled performance of the TFV8 Cloud Beast Tank into a smaller form factor, creating a well-balanced dynamic range with 3mL juice reservoir, precision airflow control, signature hinged top-fill system, and introducing the new Baby Turbo Engines coil structure. The chassis of the SMOK TFV8 Baby Beast measures 22mm in diameter, shortening the overall height from base to the top cap by over 15mm, while managing to hold a 3 milliliter juice reservoir. The refill system retains the ergonomically-orientated functionality, featuring the signature hinge-and-lock system to expose the e-juice ports. Despite the shorter stature and diminutive in size, the Micro TFV8 Baby Sub-Ohm Tank is a compact rendition of cloud-chasing achievement.

Specifications:
3ml tank capacity
Glass and stainless steel construction
22mm (.86 inch) diameter 53mm (2.08 inch) height
Easy hinged/sliding top fill mechanism
Dual adjustable airflow ports, 13mm x 2mm
Optimized for high wattage, high VG vaping
510 Drip tip connection

SMOK TFV12 Prince Tank
Image
Smok TFV12 Prince Tank, the baby of the super powerful cloud beast king, is not only a powerful one but also an all-round sub ohm tank for daily use. TFV12 Prince Tank uses convex glass tube with 8ml large e-juice capacity. And the kit includes three newest & carefully modulated coils: the Prince Q4, X6 and T10, all of which have huge cloud and extremely dense flavor. It also has newly designed crown-style body and colorful Cobra resin drip tip. Start your vaping with TFV12 Prince tank, you will find out the innovation just keeps changing the vaping experience!

Specification:
Material: Stainless steel
Capacity: 8ml
Height: 63mm
Diameter: 28mm
Thread: 510
Color: Black, Green, Gold, Blue, Red, Stainless, Rainbow, Purple

Snowwolf Vfeng BF Squonk Kit
Image
Snowwolf Vfeng BF Squonk Kit is the first squonk bf kit by Snowwolf, which is powered by single 21700/ 20700/ 18650 battery and maximum output can be reached to 120W. Vfeng Squonk Mod comes with two squonk bottles for two-in-one e-liquid vaping experiences and both of them are 3ml e-juice capacity. And here is 1.30〞TFT color screen to show details clearly. The included BF RDA features dual coils and large build deck for easy to build.

Specification:
Size: 48.5*39.0*95.0MM
Main material: Zinc Alloy
Display: 1.30〞TFT color screen
Wattage range: 10.0W-1provides an easy operation system too. 20W
Temperature range: 100℃~300℃/212℉~572℉
Voltage input: 3.2V~4.2V
Voltage output: 1.0V-7.5V
Battery support: 1*21700 /1*20700 /1*18650 (should be used with adaptor)
Modes: POWER/Ti1/Ni200/304/316/317
Resistance range: 0.05Ω-3.00Ω
Coil supporting: Kanthal/Titanium/Ni200/SS(304/316/317)TCR(DIY)
Charging support (Micro USB): DC 5V/2A
Capacity of squeeze bottle: 3ML*2

IJOY CAPO SRDA Squonk Kit
Image
The evolution of the of iJOY Capo Squonk line of mods continues. The iJOY Capo SRDA 100W Squonk Kit brings with it the option to switch between 20700 and 18650 batteries to power your way to 100 watts of vaping satisfaction. One of the biggest changes to this kit is the option of using pre-built squonk coils provided and sold by the manufacturer. This opens squonking to the masses who might not be experienced enough to make their own coils. With a wide variety of pre-built options you'll be able to find your comfort zone and vape in the fashion you enjoy. Additional improvements includes the the spring loaded 510 pin that extends all the way into the squonk bottle to get the last few drops of juice out of your bottle. One of our favorite additions is the interchangeable build decks that provides you with options two change between the style of deck you use that compliments the way you mount your coils.

Features:
Size:78*52*30mm
Colors:black,rainbow,gun-metal,stainless steel,green,gold,orange,ironman,captain america,reggae,desert storm,inferno
25mm diameter
High performance chipset designed by iwepal
21700,20700,18650 battery compatible
18650 battery adapter included
Max output 100Watts
No overhand with 25mm tanks
Resistance range from 0.05ohm to 3.0ohm
Semi-rebuildable system allows you change between pre-made coil and RTA deck
Fire button and squonk bottle in the same side for easy using
9ml food grade soft silicone bottle included
USB port charging support

Click to order IJOY CAPO SRDA Squonk Kit

Sigelei Fuchai Squonk 213 Mod Kit
Image
The Fuchai Squonk 213 Kit is a regulated squonk kit that can hit a maximum of 150 watts powered by a single 18650 / 20700 / 21700 battery (not included). With a very similar look to Sigelei’s Fuchai 213 Plus Mod, the squonk version has been redesigned so that one side of the battery compartment can store a 5ml squonk bottle. Featuring a 0.96 TFT color display with a front control face for easy control and viewing of pertinent vaping data. The Fuchai Squonk Mod has a similar user interface to the Fuchai 213 Plus with a full suite of support for TC including: Ti1 / Ni200 / SS304 / SS316 / SS316. Full safety features like Battery imbalance protection, Overheat prevention, Short circuit protection, Reverse battery protection, High input voltage warning are included in the chipset from Sigelei.

Specification:
Size: 88.5 x 45 x 31mm
Material: Aluminum alloy/zinc alloy
Display: 0.96-inch TFT color screen
Wattage range: 10 - 150W
Modes: POWER/Ti1/Ni200/304/316/317
Voltage input: 3.2V - 4.2V
Battery support: Single 21700/20700/18650 (not included)
Resistance range: 0.1 - 3.0ohm
Thread: 510 thread
Compatible with 21700/20700/18650 batteries
Soft squonk bottle for easy squeezing
Power up to 150W with 21700 battery
Deep juice well for large liquid storage
Adjustable bottom airflow

Click to buy Sigelei Fuchai Squonk 213 Kit

SnowWolf Vfeng-S 230W Kit
Image
Built with a durable, lightweight shell, the new SnowWolf VFENG-S 230W TC Starter Kit delivers a phenomenal high-performance chipset with beautiful mod construction to pair with the VFeng Tank 3 Sub-Ohm Tank. The VFENG-S 230W Box Mod retains similar technological functionalities of the original VFENG Kit, with an updated chassis constructed with Zinc Alloy and durable plastic elements to create a lighter shell. The epicenter of VFENG-S lies within the 1.3 Inch Touch-Screen OLED Screen, providing intuitive user-friendly UI with intuitive display along with multiple arrangement for a dynamic display experience. Powered by the SnowWolf series latest chipset, the VFENG-S is capable of 10 to 230W of output, multitudes of settings, and comprehensive temperature control suite. Under temperature control setting, it has Temperature Coefficient of Resistance (TCR) adjustment, a proprietary technology to adjust resistance of a wide range of heating elements to different ranges.

Feature:
1. Mechanical shape with scientific and technological style
2. Changeable LED SNOWWOLF logo and changeable color screen bring more fun
3. Powered by dual 18650 batteries with a maximum output of 230W
4. Large 1.30 inch TFT screen showing real-time vaping data

Click to order SnowWolf Vfeng-S 230W TC Kit

SNOWWOLF Vfeng 230W TC Box Mod
Image
SnowWolf Vfeng 230W TC Box Mod is unique and has a robot design. Featuring a mechanical shape with scientific and technological sense, an innovative big 1.30〞TFT touch screen mechanism, and a user changeable LED SNOWWOLF logo. The Snowwolf Vfeng 230W is powered by dual high drain 18650 batteries (not included) and has a maximum output of 230W. The Snowwolf Vfeng 230W is recognized for its elegance, power, and performance. The Snowwolf Vfeng 230W TC Box Mod is a top-tier premiere vape device, offered at an affordable price.

Features:
87mm Height
46mm Width
34mm Depth
Zinc Alloy and Stainless Steel Construction
1.3 Inch TFT Colour Screen
Wattage Range: 10W - 230W
Resistance Range: 0.05Ω - 3Ω
Requires Two 18650 Batteries (Not Included)
Multiple Vaping Modes: Power/SS/Ti1/Ni200/TCR
Temperature Control Range: 100°C - 300°C / 200°F - 570°F
Micro USB Port

Shop SNOWWOLF Vfeng 230W Box Mod

Blitz Ghoul BF RDA Tank
Image
The Blitz Ghoul BF RDA adopts innovative design on the building post, which is an integrated post with ceramic clamp for single coil building. The tank comes with side airflow, which is adjustable. Gold plated positive pin provides great conductivity. Moreover, Ghoul RDA also comes with a bottom feeding (BF) pin which make it compatible with Squonk Mods. Together with adjustable side airflow control for huge vapor and without leaking, Blitz Ghoul will bring you a magic vaping.

Features:
Ceramic construction
Single post design with ceramic clamp
Single coil configuration
Adjustable side airflow
Deep juice well
PEEK insulator
Gold plated positive pin
Comes with bottom feeder pin
510 threading connection
22mm overall diameter

Click to pre-order Blitz Ghoul RDA Tank

Vandy Vape Pulse 22 BF RDA Tank Atomizer
Image
Designed in collaboration with Tony B, Vandy Vape offer a unique 22mm diameter bottom feeding RDA for squonker devices in the shape of the Pulse 22 BF. Featuring a pre-installed squonker pin and also including a 510 contact pin adapter, allowing you to use the Pulse RDA as a dripper. The Pulse 22 BF RDA features a postless build deck for single coil builds and its low profile design allows for easy and varied coil builds.

Features:
Designed in Collaboration with Tony B.
TPD submiited
Dimensions: 1-7/16" x 7/8" (Including Drip Tip and Threads)
22mm Diameter
Gold Plated 510 Contact Pin
1.0ml e-Liquid Capacity
Postless Build Deck for Single Coil Builds
Low Profile for Easy Coil Builds
Large Post Hole Screws
Direct Bottom Feed to Side Juice Wells
Unique Side Direct Airflow
Unique Leak Resistant Quadruple Airflow Slots
Adjustable Airflow Top Cap with Four Airholes
ULTEM Wide Bore Drip Tip
Includes Pre-installed Squonker Pin
Includes 510 Contact Pin Adapter

Shop Vandy Vape Pulse 22 BF RDA Tank Atomizer

Digiflavor Drop RDA Tank Atomizer
Image
The Digiflavor DROP RDA is designed by the famous reviewer The Vapor Chronicles. It has an innovative 4 large post holes allowing for easy coil placement and maximum building space with open access to trim excess away. The stepped airflow design provides precise control while maintaining an ultra smooth and whistle free experience. The deep and spacious juice well holds more e-liquid without leaking too. It has a standard 510 pin and BF squonk pin for squonk MODs as well.

Specification:
Diameter: 24mm;
510 threading conncection;
Dual post build deck;
Dual coil configuration;
Wide build space for wicking;
Deep juice well;
Side adjustable airflow;
Stepped airflow design;
810 drip tips and 510 drip tip adapter included (510 drip tip not included);
Comes with bottom feeder pin for squonking

Click to order Digiflavor Drop RDA Tank

2018 Best Regulated Squonk Kit List:IJOY Capo 216 SRDA, Geekvape GBOX,Snowwolf Vfeng Squonk Kit
IJOY Capo 216 SRDA Kit
Image
IJOY CAPO 216 SRDA KIT is the first and smallest dual 20700 Squonk KIT! Long battery life, stylish, personalized fire button and adjustable buttons, convenient battery cover with lock design, OLED large display, 5-216W high power adjustable, simple and safe operation. Suitable for RDA with large diameter, USB fast charging support. Adopt environmentally friendly silicone + transparent ABS hard and soft combination of special squonk bottle, effectively prevent accidental squeeze leaks when disassembling! Users can also use 18650 battery with the included 18650 adaptor.

Specification & Features:
Max Wattage:216W
Squonk Bottle is easy assembly and disassembly
Compatible with Dual 18650/20700 battery
Long Battery Life
Compact Chassic Box Mod
Fashionable and colorful apperance
The Advantage compared with other squonk mod
Safe. powerful and long battery life

IJOY CAPO SRDA Squonk 100W Kit
Image
IJOY CAPO SRDA KIT is a good device for starters to step in both the world of squonking and building. It features the simple adjustable wattage system and personalized big fire button, is absolutely perfect to be users first squonker! Also, designed with the fire button and squonk bottle on the same side,it is easy to use. Semi-rebuildable system allows you change between pre-made coil and rebuildable decks in no time. Besides, the semi-Rebuildable atomizer with the interchangeable pre-made and rebuild deck system, will bring the fantastic flavor.

Specification:
Size: 78.2mm (Height) x 52.3mm (Width) x 30mm (Thickness)
Bottle capacity: 9ml
Max wattage: 100W
Resistance range: 0.05 - 3.0ohm
Suitable tank: no overhang with 26 mm tanks
Battery type:
high-rate 21700 battery (continuous discharge current≥40A, NOT included)
high-rate 20700 battery (continuous discharge current≥40A, NOT included),
high-rate 18650 battery with adapter (continuous discharge current≥25A, NOT included)
Thread: 510 thread

IJOY CAPO Squonk 100W Kit
Image
IJOY CAPO Squonk 100W Kit with COMBO RDA Triangle, the latest squonk kit from IJOY, is powered by a high rate 20700 battery which is included in or 18650 battery and maximum output can be reached to 100W with great vaping experience. IJOY CAPO Squonk mod comes with a large 9ml e-juice capacity as a bottom feeder for long-lasting vaping device. Here comes a large fire button for CAPO Squonk Mod. COMBO RDA Triangle features a double gold-plated triangle build deck with side air-flow control system with awesome vaping flavors.

Specs:
Single 20700 High-amp battery (Included)
Single 21700/18650 High-amp battery (Not included)
Maximum wattage output: 100W
Minimum atomizer resistance: 0.05 Ohm
Temperature control range: 200 – 600 F
Ni200 Nickel, Titanium, and Stainless-Steel compatibility
TCR adjustment
Unique custom user mode
Intuitive OLED display
Oversized rectangular firing mechanism
Adjustment buttons below screen
Top-loaded threaded battery cap
Squonk-ready bottom-feeding section

Geekvape GBOX 200W Squonk Kit
Image
The GeekVape GBOX Squonk 200W TC Starter Kit presents a regulated system catering to squonk-ready RDAs, integrating an AS Chipset with 200W of power and full temperature suite to pair with the Radar 24mm RDA. Designed with ergonomics in-mind, the GBOX Squonker 200W Box Mod is strategically constructed with compact form factor while housing dual 18650 batteries (sold separately) and a 8mL proprietary squonk bottles. This 24mm RDA features a hollowed out 510 pin to allow for easy squonk usage, adjustable airflow, a deep juice well, and a unique dual post build deck.

GBOX Squonk Kit Features:
AS Chipset
Wattage Range: 1 - 200 Watts
Full Temperature Control
Wattage Resistance: 0.1 - 3.5 Ohm
Temperature Resistance: 0.05 - 1.5 Ohm
Large OLED Screen
8mL Capacity Squonk Bottle
Spring Loaded Gold Plated 510 Pin
Pass-through Charging

Sigelei Fuchai Squonk 213 150W Kit
Image
The Fuchai Squonk 213 150W Kit is right here for you! Powered by a single 21700 battery, it is capable of firing up to a maximum output of 150W. It is also compatiblw with 20700 and 18650 battery. The mod comes with a 0.96 inch TFT color screen that indicates vaping ststus from resistance to wattage. The soft squonk bottle is easy to squeeze. The attached bottom feeding RDA features deep juice well for large storage and adjustable bottom airflow. The Fuchai Squonk 213 Kit will definitely bring you massvie clouds with optimal flavor!

Features:
Battery Sled: - 18650, 20700, 21700
Wattage Range: 10-150 Watts
Minimum Resistance: 0.1 - 3.0 Ohm
Juice Capacity: 5mL
Temperature Control
Square RDA
Pass-through Charging

Snowwolf Vfeng BF Squonk Kit
Image
The Sigelei Snowwolf VFeng Squonk is a modified version of the original Snowwolf VFeng that had released late 2017. The VFeng Squonk is a single battery (18650, 20700, 21700 Compatible) 120W Squonking Box Mod Starter Kit with a unique dual 3mL Squonking Juice bottles built into either side for a total of 6mL stored for on-the-go use. With a full temperature control range and a massive TFT color display, the Snowwolf VFeng Squonk includes a specialized BF RDA with a wide build space for a unique array of build possibilities.

Features:
1. Double squeeze bottle design, providing mixed flavor option to choose
2. Total 6ml liquid capacity, large vaping oil storage
3. Compatible with 21700, 20700 and 18650 batteris(adapter needed)
4. Single battery power with a max output of 120W
5. Multiple working modes available, including Power, Ti, Ni200, SS304, SS316, TCR, etc.

OUMIER VLS RDA Tank Atomizer|First Vertical Coil Design RDA
OUMIER VLS RDA Tank Atomizer
Image
With a cute appearance, OUMIER VLS RDA is an innovative rebuildable tank with a unique separately posts build deck which is suitable for vertical coil and transverse coil with single coil or dual coils building. It also adopts a precise five holes side airflow system to bring huge vapor with nice flavor. Together with easy top filling, a 810 drip tip, 1.5ml deep juice well and a replaceable BF pin, VLS RDA will bring your vaping to a new level.

Features:
1. The first vertical coil design RDA
2. Separately posts, easy coil locking & wicking
3. Single coil/dual coil adjustable without extra
accessories
4. Switchable two way airflow design, cloud and flavor available
5.Replaceable BF pin included for squonk box mods

Click to order OUMIER VLS RDA Tank Atomizer

Related RDA Tanks:
Vandy Vape Iconic RDA
Image
Vandy Vape x Mike Vapes introduce to you the Iconic 24mm RDA, featuring a two post clamp style build deck, PEEK insulator, and 8mm deep E-Juice well. The two post clamp style build deck has a 1.5mm clamping space with top mounted Phillips screws that is able to accommodate larger style builds. The Iconic RDA has both side airflow and a bottom tubes airflow system; the bottom tubes airflow system allows for extra room in the juice well and prevents the risk of leaking. There are two tubes each side of the RDA and they are positioned so the airflow can flow underneath the coils. The side airflow system measures at 8.5mm by 1.5mm and allows additional airflow into the RDA. Included with the Iconic RDA are three 810 drip tips: a 12mm bore resin drip tip (color at random), an 18.5mm bore delrin doc drip tip, and an 18.5mm bore frosted doc drip tip, as well as a gold plated bottom feed pin. The Vandy Vape x Mike Vapes Iconic 24mm RDA is the another addition to the renowned Vandy Vape line of products!

Features:
Clamp posts system
Side & Bottom tubes airflow system
Bottom airflow tubes allows extra room in juice well and prevents risk of leaking
Protruding squonk pin included
Top filling design
510 threading connection
24mm overall diameter

Shop Vandy Vape Iconic RDA Tank Atomizer

First Regulated Vape Pen:Uwell Nunchaku 80W Starter Kit
Uwell Nunchaku 80W VW Starter Kit
Image
Uwell Nunchaku 80W kit is the first vape Mod Kit from Uwell. Power by single 18650 battery that Max output can up to 80W. Features the innovative fire button that is convenient to switch the multiple modes. The ventilation hole of the battery door provides the anti-overheating protection. Also, the battery indicator on the screen will bring the intelligent experience. Working with the brand new Nunchaku tank and the easy plug-pull coils, the Uwell Nunchaku 80W Kit will bring the chase cloud vapor.

Specification:
1. Tank capacity :5ml
2.Material:stainless steel & quartz glass & copper &silicone
3. power range: 5-80W
4. A new generation of E-cigarette control panel by our independent R&D, makes the tube as safe as a box mod.
5. Multiple work modes: power mode, TC mode(NI,SS), By Pass mode.
6. Replacement 18650 battery or charge over Usb
7. Plug-pull coils, easy to replace.

Click to see more detail about Uwell Nunchaku 80W Starter Kit

SMOK Stick Prince Starter Kit
Image
The SMOK Stick Prince is a brand-new starter kit with a 3000mAh battery and TFV12 Prince Tank. The Stick Prince battery has a hexagon power button and an exquisite carved battery base, offering a great hand feel when you're using it. It's large battery capacity ensures you can vape all day long and the LED indicator tells you the specific conditions of the mod. The latest TFV12 Prince adopts a top filling system, adjustable bottom airflow and huge 8ml tank (2ml for EU). The new added Prince-M4 core delivers a silky, rich cloud taste too.

Features:
3000mAh large battery capacity
Special hexagon power button
Carefully carved battery base
Intelligent LED indicator
Multiple protections
Cobra drip tip
Adjustable bottom airflow
Top filling system
Patented Locking Mechanism

Click to order SMOK Stick Prince Starter Kit

First Release:VOOPOO Gold Drag Resin 157W Mod Limited Edition
VOOPOO Gold Drag Resin 157W Mod
Image
The Gold Drag Resin is a limited edition specially for Chinese New Year, with Real gold gilded appearance, the VOOPOO Gold Drag Resin 157W Mod adopts Gene Chip inside is a dual 18650 (sold separately) powered mod compatible with the VooPoo PC App for full customization and fine tuning settings. The Gene Chip inside the DRAG offers a full temperature control suite with 157W max power and a firing speed of 0.025 seconds! The VooPoo DRAG is a highly efficient variable wattage mod box with a chip efficiency rating of 95% for accurate and reliable power output. Besides, it features powerful temperature control of Ni, Ti and SS coils.

Parameters:
Size: 90x 54x 24mm
Working Voltage: 6.4- 8.5V
Working Current:1- 40A
Output Voltage Range:0- 7.5V
Resistance range: 0.05- 3.0ohm (VW); 0.05- 1.5ohm (TC)
Output Power: 5- 157W
Temperature Range: 200-600°F/ 100- 315°C

Features:
32 bit super US Gene Fun Chip
Powerful PWM and MOS Module
Fastest fire speed- 0.025s
Max 157W output power
Firmware upgradeable
Attractive appearance

Click to order VOOPOO Gold Drag Resin 157W Box Mod

VOOPOO Alpha 1 (α-I) 222W Box Mod
Image
Alpha One (α-1) Box Mod adopts the new Gene.Fan chip with high quality and powerful performance. It is the latest TC Mod by VOOPOO, featuring a 222W max output power with the fastest fire speed of 0.025s, powerful temperature control of Ni, Ti and SS coils, and an innovative super LOVE Pulse mode. Love Pulse is an actively waved output mode for 160-220W high wattage to provide longer vaping time and give you a more gentle experience under high power. You can simply update this device by connecting it to computer with a USB cable too. The attractive appearance also makes this MOD irresistible to vapors. Black and Gray colors.

Features
222W Maximum Output
Geometric shape design
All in one press design
Convex style and ripple cooling design
With LOVE pulse, waved output provides longer vaping time
Intelligently recognizes new and old atomizers and recommends the optimum output power
Changeable battery covers available in several colors, to satisfy your personal tastes
Support balanced charging with different brands of batteries
8 battery charging protection functions for a safer internal charging system

Click to shop VOOPOO Alpha One 222W Box Mod

OUMIER VLS RDA Tank Atomizer|Unique build deck suitable for vertical coil and transverse coil
OUMIER VLS RDA Tank Atomizer
Image
With a cute appearance, OUMIER VLS RDA is an innovative rebuildable tank with a unique separately posts build deck which is suitable for vertical coil and transverse coil with single coil or dual coils building. It also adopts a precise five holes side airflow system to bring huge vapor with nice flavor. Together with easy top filling, a 810 drip tip, 1.5ml deep juice well and a replaceable BF pin, VLS RDA will bring your vaping to a new level.

Features:
PEI construction
The first vertical coil/transverse coil, single coil/dual coil suitable RDA
Five-holes side airflow system
Top filling design
Seperataely posts, easy coil locking and wicking
Replaceable BF pin
810 Drip Tip
510 threading connection
25mm overall diameter

Click to shop OUMIER VLS RDA Tank

Related rda tank:
Tigertek Springer X RDA Tank
Image
The TigerTek Springer X RDA is a unique rebuildable dripping atomizer that removes the idea of traditional screws and replaces it with special spring loaded clamp build deck. The Springer X RDA utilizes a easy to use push down clamp system to install your coils. Push down the spring loaded clamp, install your coil and release the clamp! The Springer X RDA supports both single and dual coil configurations on a gold plated build deck. The Springer X features dual airflow slots that may be adjusted. Choose from a single coil or dual coil airflow configuration for maximum vapor production. Springer X RDA includes both a delrin wide bore drip tip and a ULTEM wide bore drip tip. ULTEM is a high temperature plastic with a significantly higher melting point compared to Delrin.

Feature:
1. Four holes for different coil types, single/dual coils
2. Easy to built coils by 2pcs built-in SS304 Springs
3. Huge chamber for easy wicking and much liquid
4. Unique no screw deck design, get rid of the screws
5. Both Ultem and Derlin drip tips are included

Click to see more detail about Tigertek Springer X RDA Tank

Recommend Pair box Mod:
Lost Vape Mirage DNA75C Box Mod
Image
Lost Vape Mirage DNA75C Mod is designed and manufactured by Lost Vape LTD.. It can compatible with the single high drain 18650, 20700 and 21700 battery that fire up to Max 100W. Featuring the lost vape DNA75C inner chip, it has boost and preheat power function. Besides, the smooth resin special appearance brings the fashionable vaping. Its compact size is so comfortable and conveniently to hand it anywhere.

Features:
Temperature Limit: 200'F - 600'F
Output Power: 1-75 Watts
Boost/Preheat: 100 Watts Power
Powered by evolv DNA75C board with firmware upgradable
Theme designer software/customizable user interface
Onboard programmable multicolor LED
Anodized aluminum frame and top
Boost/preheat 100 watts power
Integrated 1amp on-board balanced charger
Flip-open battery sled
Stainless steel 510 atomizer connector
Powered by single 18650 battery (sold separately)

Click to shop Lost Vape Mirage DNA75C Box Mod
vaporl.com/ - the cheapest online vapor store

Répondre

Retourner vers « Promos / Nouveautés / Réassorts »