Les Mods Bottom Feeder (BF) ⇒ Pulsar, Box BF (par Original Moddog)

[xu7jp4]

En espérant qye Chronopost soit rapide

Envoyé de mon SM-N910F en utilisant Tapatalk

[ludo84]

Oui

[xu7jp4]

Je suis dégouté Chronopost annoncait avant 13h....

Envoyé de mon SM-N910F en utilisant Tapatalk

[xu7jp4]

Bon ça y est monté, testé bref conquis

Envoyé de mon SM-N910F en utilisant Tapatalk

[xu7jp4]

A quoi sert le grand o ring ?

Envoyé de mon SM-N910F en utilisant Tapatalk

[ahnakyn]

Aucune idée...

Tu as d'autres questions

[Olivieeer]

Pas mieux...

[xu7jp4]

Aucune idée...

Tu as d'autres questions

Pas mieux...

[Olivieeer]

Bon, comme dit sur FB, opération "adoucissement" du switch réussie !
Il suffit en effet de couper une ou deux spires du ressort, ça marche nickel !

[ahnakyn]

Voix mon petit guide ( en anglais) pour les proprios de pulsar :

For new or future owner of the pulsar: don't stress ! This pulsar is awesome and works perfectly ! Just some owners must make some adjustments...

For the moment, we have listed 3 little mistakes on the batch 1. (Sorry for my poor English)

1) The pin 510 arrive with only one O-ring. Without the second O-ring, the bottle can be not flush.

Solution: fix the second O-ring done in the little bag. It take 2 minutes for fix it on the 510 connector. This problem will be resolved for the new owners.

2) The length of the tube/straw into the bottle is to short. We need 1cm longer to touch the bottom of the bottle. I think it was the good length for the bottle seen on the prototype but the new bottle is longer.

Solution: We can easily find this kind of tube/straw on the net, after we just cut it to the good length. On Chinese website you can find some bottles with a long tube....

3) The battery cap is not practice. We need a little piece in alumide for use it. Some people as me have some problems when we try to fit it the first time.

Solution: After some fits, it’s ok. Michele Brunazzo said that they are going to produce the same system cap as the prototype and it will be available soon on their website.

4) Recommandation : please use the screw driver on the chain when you fit/unfit the two mettalic tubes on your pulsar.

5) Some people think to have a problem with the 510 cause when they push fire, nothing happened. This is not a problem, your pin 510 is not too short. I don’t think it’s possible that pins have different length. The pin is a screw and you can screw it or unscrew it. If the pin is too screw, your atty can’t touch it and when you make fire, nothing happened. You must unscrew it. I have the same “problem” with my octopus. The pin is perfect for my hadaly but when I put the Narda nothing happened and I must unscrew my 510…I have read that someone have the same problem and after unscrew his 510, the pulsar work perfectly.

6) your bottle are difficult to remove ? Just drop some VG on the top of the bottle and after it's really easy to remove

7) New recommandations : I had each day more difficulties for screw and unscrew the battery cap. I have spray and clean the cap and the aluminum plate with WD40 and now it's so easily to fit that I don't need the key for fit and unfit the cap!

For the moment, these mistakes are not very important, it's minor bug with some easily solution. Don’t forget it’s the first batch and this kind of problem can appear. I understand it, I accept it. I trust in Michele Brunazzo!

I just hope that the first owners with these disagreement will have a little discount when order i.e. new cap battery, new derlin color, new battery adapters and that we’ll receive 3 tubes/straw with the good length…